Cadwell Adjustable 2cm Double Curtain Pole

Features

• The carrier consists of two parts: a) the Lower part of the carrier and b) the Upper part of the carrier. The lower part of the carrier is provided with a centered hole. To do this, a hole has to be drilled in the wall and the enclosed dowel has to be inserted into the hole. Next, put the long screw through the central hole in the lower part of the bracket and screw it into the wall. The same must be done with the other carriers. The alignment of the beams must be horizontal. When the lower parts of the carrier are attached, the upper part of the carrier is pushed onto the protruding pin and fixed with the small screw (size 3x12 mm). The openings must point downwards. Do the same for the other carriers. Now the inner running profile can be inserted. To do this, turn the inner running profile so that the running groove is at the front and rear. The inner running profile is now inserted into the rod recesses from below and turned so that the running groove points downwards. The inner running profiles are fixed with the screws (size 2.9x19 mm). The folding gliders can now be pushed sideways into the inner running profile. Once all of the folding gliders have been pushed into the inner running profile, in the last step, only the end pieces are pushed onto the profile ends.