Although this is a pretty trellis, it gets 2 stars deducted for the assembly. It should have been easy. Put the 2 pieces together, add the 2 screws using the included tool, and voila! Well, not so seemingly easy. One of the 2 legs on the top piece that should have easily slid into the holes on the bottom piece was just slightly bent, so after fighting to get both legs inserted, I finally laid both pieces on the floor and was able to get them both in. Then I had to stand it upright and slam the whole thing on the floor to get the top legs to fully fit into the bottom piece. So then you’re to screw in the 2 small screws to hold it together. The included tool was a joke. I retrieved my real Philips head screwdriver and proceeded. However, the screws are too long. I was certain that I didn’t see any holes in the legs of the top piece and inadvertently put the pieces together backwards, but JUST IN CASE, I tried to pull them apart to double check. No go. Even using a hammer to try to bang them apart was an exercise in futility. Gently tapping at first left marks on the metal, so I used a rag to be able to really strike it but only 1 side budged a little. This thing is never coming apart. Nowhere on the included instructions did it show that there was a side with holes to line up. Far too frustrating for something that should have taken 2 minutes to assemble.
