The baby room set is DINO best. from the cot and changing unit. The material is solid beech, lacquered in anthracite. The bed surface is 60 x 120cm, including a 3-way height-adjustable slatted frame with 13 slats. The adjustable range of the slatted frame from the floor to the top edge of the slatted frame is approx. 18.3cm, 33.9cm and 49.5cm. This makes it easier to reach in and allows you to easily reach your child. The fixed bars have a diameter of 1.6cm and there are no slip rungs. The solid bed posts have a thickness of approx. W: 45 x D: 22mm. The headboard, footboard, and side rails are approx. 84.4cm high. The bed is open at the bottom with a ground clearance of approx. 18.3cm. The item is sturdy and has a high-quality finish, by EN716-1 and 2. The cot footprint is approximately 84.4cm H x 124.4cm W x 64.5cm D. The delivery also includes the side shelf, which can also be used as a changing table. Practical are the three shelves, where you can quickly have your daily needs at hand. The upper level has a border into which a changing mat can be placed. The inner dimensions are approx. 75cm W x 5.2cm D x 45cm D. The sturdy construction made of high-quality beech wood gives the item very good stability. The frame has a post thickness of approx. 35 x 22mm. The middle and lower shelves have a size of approx. W: 75 x D: 45cm and offer plenty of space for baby utensils or towels. The floor clearance of 18cm makes it easy to clean under the shelf. Max. Load on cot approx. 20kg, max. Shelf load approx. 11kg. The fittings are made of metal and the mattress and decorations are not included. The product is disassembled, with assembly instructions for easy self-assembly. The shelf space is approximately 79.4cm W x 95cm H x 49.8cm D.
The baby room set is DINO best. from the baby/junior bed and the changing unit. You have a double advantage, as the cot cot can be converted into a junior bed. A very practical way to use the cot as a junior bed. The material is solid beech, lacquered in anthracite. The bed surface is 70 x 140cm, including a 3-way height-adjustable slatted frame with 15 slats. The adjustable range of the slatted frame from the floor to the top edge of the slatted frame is approx. 18.3cm, 33.9cm and 49.5cm. This makes it easier to reach in and allows you to easily reach your child. The bars have a diameter of 1.6cm and there are 3 slip rungs. The solid bed posts have a thickness of approx. W: 45 x D: 22mm. The headboard, footboard, and side rails are approx. 84.4cm high. The bed is open at the bottom with a ground clearance of approx. 18.3cm. In addition, the bedside for conversion to a junior bed is included in the delivery. The prerequisite for the conversion should be that your child has grown out of the cot and can already get in and out of bed on their own. The height from the floor to the top of the bed is then 31.8cm. This means you and your child can enjoy the bed for longer. The item is sturdy and has a high-quality finish, by EN716-1 and 2. Footprint baby/junior bed approx .: W: 144.4 x H: 84.4 x D: 75.5cm. The delivery also includes a side shelf, which can also be used as a changing table. Practical are the three shelves, where you can quickly have your daily needs at hand. The upper level has a border into which a changing mat can be placed. The inner dimensions are approx. 75cm W x 5.2cm D x 45cm D. The sturdy construction made of high-quality beech wood gives the item very good stability. The frame has a post thickness of approx. 35 x 22mm. The middle and lower shelves have a size of approx. W: 75 x D: 45cm and offer plenty of space for baby utensils or towels. The floor clearance of 18cm makes it easy to clean under the shelf. Max. Load on cot approx. 20kg, max. Shelf load approx. 11kg. The fittings are made of metal and the mattress and decorations are not included. The product is disassembled, with assembly instructions for easy self-assembly. The shelf space is approximately 79.4cm W x 95cm H x 49.8cm D.