The loft bed with slide from the series Pino is an ideal bed for sleeping, playing and dreaming. The lying surface is 90 x 200 cm. It is made of solid pine and has a post thickness of 64 x 64 mm. The finish is lacquered. It is fully equipped, with a roll-up slatted frame, the ladder and a slide. The textile set in the design "Dino", consisting of the curtain with the great representation of a fire engine, is also included. The textiles are 100% polyester, washable at 30°. The slide brings a lot of fun while playing, it is an adventure playground for every child's room. The ladder (approx. 35 cm wide) and the slide (approx. 39 cm wide) can be mounted on the left or right. The all-round fall protection, the wide steps for safe climbing up and down, as well as the high-quality workmanship and good stability, distinguish this article. The height from the upper edge of the bed side to the upper edge of the fall protection is approx. 36 cm, with a max. mattress height of approx. 20 cm. The space under the bed can be used for playing or as storage space. The height from the floor to the lower edge of the bed side is approx. 72 cm. The distance between ladder and slide is approx. 118 cm. As floor space in the room you need approx. W: 210 x D: 218 cm. The height is approx. 114 cm. The bed is not suitable for children under 6 years. The decoration and the mattress are not included. The article is disassembled with assembly instructions for easy self-assembly. FSC® certified and built according to EN 747-2:2012+A1(2015).
